Free QuoteThe Trimble LSI GS010 crane boom angle sensor will accurately measure all of the following: Boom Angle, Luffing Jib Angle, List & Trim and Out of Level. This inclinometer has a span from -180º to +130º while the list trim sensor has a span from -45º to +45º. We also offer a 360º version. The LSI GS010 crane boom angle sensor doesn’t have any moving parts and it doesn’t use any type of liquid. It is also temperature compensated for maximum accuracy. The GS010 is self leveling in its design.
LSI GS010 Crane Boom Angle Sensor Features
- No moving parts, uses electronic chip
- Direct Sequence-Spread Spectrum-Two Way Communication
- Transmission Range: 4,000 feet; 1,300 meters
- Ships as standard with 1-“D” Cell lithium battery, 2-4 years battery life
- Easy calibration
- 2 year warranty against defects
- Sensor can be left hand or right hand cab mounted, will automatically adjust for the side it is installed on
- Ideal for monitoring: Main Boom, Luffing Jib, Live Mast, Barge List Angle, Custom Applications
The LSI GS010 crane boom angle sensor provides accurate monitoring of Boom Angle, List & Trim, Out of Level and custom applications. There is an increasing and immediate need in today’s crane & lifting market to monitor a wide variety of angles on cranes or other pieces of equipment. An inclinometer (or clinometer) is an instrument for measuring elevation, angles of slope (tilt) or the inclination of an object with respect to gravity. It is also referred to as a tilt meter, tilt indicator, slope alert, slope gauge, gradient meter, gradiometer, level gauge, level meter, pitch & roll indicator or declinometer.
With the tapped mounting blacks in place, you can simply place the boom or structure at zero degrees and adjust the angle sensor until you see the green light flash. The green light indicates that the inclinometer is level. At that point, the only thing left to do is tighten it down and it’s done. You won’t need to move the boom or structure to a high angle to do a span calibration. This feature is designed to eliminate the hassle and save you time and money. The typical range is 4,000’ or 1,300 m. The LSI GS010 crane boom angle sensor can be installed with our GS550, GS553 and GS820 displays. It will also work with our Wireless Gateway.
