How to Add a Sensor to the GS550 Display

 

We are a market leader in the sale of LSI Trimble wireless components.  Our status as a global dealer allows us to provide you with fast, cost effective parts anywhere in the world.  The majority of parts are in stock and can be shipped the same day.  Contact us toll free in the US at 855.BODE.TEC or worldwide at +1.303.433.8878 

Parts Store Free Quote

 

  1. Determine the radio identification number (ID) of the sensor to be added. This number between 10000 and 99999 is engraved on the sensor.
  2. Go to menu page 4A1).
  3. Advance to the next empty sensor position in the sensor list. Press Next repeatedly until the LCD shows “NO SENSOR” on the bottom line. Up to 32 sensors may be added to the sensor list.
  4. The ID number should flash; this means it is adjustable. Use Up and Down to program the sensor ID.
  5. Press Next.

Note: Press Up and Down simultaneously to make the sensor id number jump directly to 20000. Press Up and Down simultaneously again to make the sensor id number jump directly to 15000. Press Up and Down simultaneously a third time to make the sensor id number jump directly to 0.

  1. The sensor type “NO SENSOR” should flash; this means it is adjustable. Use Up and Down to select the sensor type.
  2. Press Enter to save any changes made to the sensor list.
  3. Press Exit three times to return to the operation display.

Information from Trimble GS550 Display & GS Series Sensors Installer and Users Manual