A New HC248 Computer System Includes
- New Graphical Display
- RCI Crane Computer
- 35K Load Cell for Main Line
- Boom Angle Sensor
- Anti Two Block Switch
- Load Chart Programming
If you need assistance with a Link Belt crane LMI computer replacement contact us toll free in the US at 855.BODE.TEC or worldwide at +1.303.433.8878
Link Belt HC248 LMI Computer Replacement Options
HC248 LMI Computer Replacement Component Pricing
Link Belt HC248 New Computer Components
Other Lattice Crane LMI Replacements by BTS
Typical Computer Setup in Link Belt Lattice Crane
Link Belt PAT DS350 General Information
The PAT DS 350 Rated Capacity Limiter (RCL) has been designed to provide the crane operator with essential information required to operate the machine within its designed parameters.
The PAT DS 350 Rated Capacity Limiter (RCL) monitors various crane functions and provides the operator with a continuous reading of the crane’s rated capacity. The readings continuously change as the crane moves through the motions needed to make the lift. If a non- permitted condition is approached, the RCL is designed to warn the operator by sounding an audible alarm and illuminating a warning light.
During crane operation, The RCL provides the operator with information such as: the selected operating mode, main boom length, main boom angle, jib length, jib angle, and the total load being lifted by the crane. The total load is defined as all weight at the end of the hoist line, which includes hook block, load, rigging, etc..
This manual describes the function, operation, and maintenance of the PAT DS 350 Rated Capacity Limiter (RCL) System for Link-Belt Lattice-Boom Cranes.
This system assists the crane operator in promoting safe and efficient operation by monitoring crane loads and by warning the operator of approaching overload conditions
