GC035 Trimble LSI Load Cell
The GC035 Trimble LSI wireless load cell for 7/8″ to 1-1/8″ crane wire rope can be used on all telescopic boom or lattice boom cranes, including offshore cranes. The GC035 ships pre calibrated thereby providing for an extremely simple and cost effective installation. Radio range of 4,000 feet, 2 year battery life, potted electronics for waterproofing, and a two year manufacturers warranty makes the GC035 load cell one of the best crane load cell products on the market. Contact us toll free in the US at 855.BODE.TEC or internationally at +1.303.433.8878
GC035 Crane Load Cell Features
- 7/8″ to 1-1/8″ Rope Diameter
- All stainless frame and hardware
- Accuracy of +/-1% on a single part of line
- Option available with ATEX zone 0 and CSA Class 1 division 1 certification.
- Radio range with line of sight: 4000ft
- 2 years battery life for typical applications
- Temperature range: -40°F to 185°F
- Potted electronics for increased water protection
- Rugged field-replaceable antenna
- 2 year warranty
- Designed with a safety factor of 5:1 on the safe working load.
- All load bearing bodies have been tested by ultrasounds, die-penetrant and proof loaded to 150% of capacity.
GC035 Trimble LSI Load Cell Documentation
Load Cell Datasheet
Load Cell Brochure
Load Cell Specifications
GC035 Trimble LSI Wireless 35K Load Cell
Trimble LSI wireless load cells are installed inline on cranes and lifting equipment, and are a critically important elements in the structural integrity of the safe lifting of the load.
LSI GS series load cells set the industry standard for load cell quality control programs. Load Systems International’s specific quality control program is designed to ensure that every single load cell is strictly tested and certified.
Each LSI load cell is built from 17-4 stainless steel. The 17-4 provides superior strength yield and excellent corrosion resistance. To ensure that your system setup time is minimized, each load cell ships pre-calibrated thereby eliminating the need for time consuming calibration and testing. Simply install the load cell, connect wireless to one of the LSI displays, and you will be ready to go to work.
Each load cell ships standard with a military grade “D’ cell lithium battery that is able to withstand temperature variances from the Canadian Arctic to the deserts of Dubai. Our load cells are rated from an operating temperature of -30ºF to +180ºF; -35ºC to +85ºC. LSI temperature compensates your load cells to ensure a consistent load value regardless of temperature or location. Each sensor is equipped with a voltage switcher allowing a worldwide readily available “D” cell alkaline battery to be installed into the transmitter in the event you cannot easily source a lithium battery.
Accuracy on a single part of line is an impressive .1% and averages 1% on multiple parts of line.
LSI always wants to provide the utmost reliability and takes the extra steps to pot electronics in a gel that eliminates moisture failure on the circuit board.
CSA explosion proof load cell options are naturally also available.
