Crane Repair

Is Your Tower Crane Ready to Withstand Adverse Weather Condition?

Tower crane is the most critical machine for a labour-intensive industry, which has to employ its workers on heavy work projects, including loading and offloading weights. The workers find it easy and safe to lift loads at the workstation. Depending on the requirement, different crane machines are put in job to deal with heavy […]

By |January 17th, 2015|Crane Repair|Comments Off on Is Your Tower Crane Ready to Withstand Adverse Weather Condition?

Demag PAT PDC E 93 Error

A recent conversation with one of our customers regarding their Demag PAT PDC E 93 Error.  The E93 error code is a very difficult and complex error as it is not possible to directly identify the failing part.

The Demag PAT PDC E 93 Error indicates a communication problem between the PDC system and the […]

By |July 21st, 2014|Crane Repair, Demag Crane|Comments Off on Demag PAT PDC E 93 Error

PAT DS 350 Error Codes

An expert from a recent service email regarding PAT DS 350 Error Codes:

I have attached two pages with error codes. Those are the only once that include a number 8. If it shows up with an 8 only you must have a digit missing on the display (LCD).

The only errors that includes 8 is […]

By |July 9th, 2014|Crane Repair|Comments Off on PAT DS 350 Error Codes

PAT DS350 Modular – Troubleshooting angle problem – E15

We recently helped a customer solve his E15 angel indication error on his PAT DS350 Modular on a Grove TMS700B.  Here is a copy of the email:
 PAT DS 350 Modular
Good Evening Customer,
 
Please refer to attached DS 350 Modular Service Manual. I found sections in the service manual that are suitable and will assist you […]

By |November 6th, 2013|Crane Maintenance, Crane Repair|Comments Off on PAT DS350 Modular – Troubleshooting angle problem – E15

Grove TMS870 PAT DS350G Boom Control System

Grove TMS 870 – 5 section boom with PAT DS350G (old) boom control system

We recently repaired a DS350G boom control system on a Grove Crane TMS870 with 5 section boom. The system that is the original old type DS350G type boom control system designed by PAT (Hirschmann) for the Grove boom control application is […]

By |October 24th, 2013|Crane Repair, PAT Hirschmann DS 350|Comments Off on Grove TMS870 PAT DS350G Boom Control System

Manitex Boom Trucks DS50 Troubleshooting

 

We have recently received a number of requests regarding troubleshooting for the PAT-Hirschmann DS50 systems on Manitex Boom Trucks. Many of these requests have involved the main board located inside the cable reel. Unfortunately this main board has been obsolete in the US for about 6 years and our European suppliers now also have […]

By |August 23rd, 2013|Crane Repair|Comments Off on Manitex Boom Trucks DS50 Troubleshooting

Demag PPM PDC Rack Repair

Here is a quick video of a Demag PAT-Hirschmann PDC Rack or Demag PPM PDC Rack Repair. The Demag PPM PDC Rack controls all the crane function.
By |June 17th, 2013|Crane Repair|Comments Off on Demag PPM PDC Rack Repair

Demag PPM LWG Cable Reel Length Sensor

A recent video of three new length angle cable reels installed on a Demag PPM Crane. A PAT-Hirschmann LG 152 is on the first boom section. A PAT-Hirschmann LG 208 cable reel with an angle sensor along with the LG152 is connected to the PAT-Hirschmann LWG 209 Cable Reel with profibus boards for the […]

By |June 6th, 2013|Crane Repair, Crane Upgrade|Comments Off on Demag PPM LWG Cable Reel Length Sensor

Demag PPM PDC Wiring Repair

A short video of some recent work on a PAT-Hirschmann PDC unit installed on an older Demag PPM Crane. It required a complete rewire due to extensive corrosion.
Demag PPM PDC Wiring Repair Video

 

This could have been avoided if scheduled crane maintenance was strictly followed. This was far costly than a crane maintenance. Crane owners […]

By |May 28th, 2013|Crane Repair|Comments Off on Demag PPM PDC Wiring Repair

Demag PPM Proximity Sensor Switch

Installation of a Proximity Sensor Switch
One of the joys of a complete boom rebuild often involves installation of new proximity switches. Here is a short video from a Demag PPM Proximity Sensor Switch instal.

 
Demag PPM Proximity Sensor Switch Video

By |May 25th, 2013|Crane Maintenance, Crane Repair|Comments Off on Demag PPM Proximity Sensor Switch