Trimble Product Catalog – Crane Load Cell
The Trimble crane load cell, load pin, and tensiometer make up the primary wireless crane load indication hardware. The GC wireless load cells are a rugged, simple, economical solution to crane load indication that allows for fast no calibration needed setup. For immediate assistance with yoru load cell needs, please contact BTS Crane Parts toll free in the US at 855.BODE.TEC or worldwide at +1.303.433.8878
Trimble Crane Load Cell design features include:
- Wireless GC Load cells standard single part line pull sizes ranging from 5,000 – 600,000 lbs (2.5 – 300 Tons)
- Typical Trimble crane load cell accuracy: ±1% of rated capacity on a single part of line
- Communication range: 4,300 feet (1,300 meters)
- Operating temperature: -40°F to +185°F (-40°C to +85°C)
- 2 years battery life under normal operation
- Potted electronics for increased waterproof protection
Wireless Stainless Steel Tensiometer design features include:
- Ideal for marine/offshore and mooring line applications and barge cranes
- Available for wire rope sizes of 3/8” (9.5 mm) to 4” (102 mm) in diameter
- Option to monitor rope payout, speed & direction
- Rope payout accuracy: 1” (25.4 mm)
- Load reading precision: ±3% of rated capacity • Single-line capacity up to 450,000 lbs (250,000 kgs)
Wireless Load Pin design features include:
- Ideal when maximum hook height is critical
- Typical accuracy: ±1% on a single part of line
- Communication range: 4,300 feet (1,300 meters)
- Operating temperature: -30°F to +180°F (-35°C to +85°C)
- 2 years battery life under normal operation
- Potted electronics for increased waterproof protection
Low-Cost | Lightweight & Portable Aluminum
Wireless GC Load Cell design features include:
- Affordable for a wide range of applications & industries
- Standard single part line pull sizes ranging from 11,000 – 1,100,000 lbs (5 – 500 tonnes)
- Typical Trimble crane load cell accuracy: ±1% of the WLL
- Operating temperature: -31°F to +140°F (-35°C to +60°C)
- Communication range: 4,300 ft (1,300 m)
- 2 years battery life under normal operation
- Potted electronics for increased waterproof protection
Cable-Based Tensiometer design features include:
- Available in stainless steel, dual wire, and for small wire rope diameters
- Can be mounted anywhere over the hoist rope that will not interfere with hoist operation
- 6 to 250 Tons maximum line pull capacities available
- Rope diameters available ranging from 0.79” to 3” (20mm to 76mm)
Cable-Based Load Cell design features include:
- Operating temperature: -40°F to +185°F (-40°C to +85°C)
- Capacity range: 1,100 – 600,000 lbs (0.5 – 300 Tons)
- Made from stainless steel, ideal for marine/offshore and other demanding environments
Cable-Based Pressure Transducers design features include:
- Pressure range: 0 – 5,000 psig (0 – 350 bar)
- Typical pressure accuracy: ±0.5% full scale
- Operating temperature: -13°F to +185°F (-25°C to +85°C)
- Made from stainless steel
Wireless Transmitter & Pressure Transducer LMI System design features include:
- Operating temperature: -40°F to +150°F (-40°C to +65°C)
- Potted electronics for increased waterproof protection
- 1–3 years battery life under normal operation
- Designed for proportional & non-proportional hydraulic cranes
- Wireless LMI system with two pressure transducers that read the rod & bore side pressures of the hydraulic lift cylinders
- Pressure range: 0 – 3600 psi (0 – 248 bar)
- Pressure resolution: 1 psi (0.069 bar)
- Typical pressure accuracy: 5 psi (0.345 bar)
- Communication range: 4,300 feet (1,300 meters)
